Prices include the appropriate lawful VAT
plus shipping fees (if applicable)

Allen & Heath Xone 62
Professional club / DJ mixer
Voted Best Club Installation Mixer
in the DJ Magazine Techno-Scan Awards 2002 & 2003

6 Dual Stereo Channels
CH 1&2 have XLR Mic inputs and [TRS] stereo line level inputs, with ‘corrective’ EQ. CH 3-6 have stereo RCA RIAA turntable inputs and stereo RCA line level inputs, plus powerful 4 band ‘music’ EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader. CH 3-6 have X-fade assign section.

Stereo Mix Outputs
Balanced mix outputs on XLR with level control, plus secondary RCA ‘music only’ outputs for recording. A post fade [TRS] mono sum output is also provided. The mix signal is displayed on 12 segment 3 colour bar meters.

Auxiliary Send
All channels have a stereo auxiliary send which can be individually switched pre or post fade. There is also a post crossfader send to this stereo aux, so a program feed to a zone is possible. The outputs are [TRS] jacks.

4 Band EQ
Powerful 4 band EQ with ‘asymmetric’ characteristic on CH 3-6; +6dB boost to preserve headroom and -26dB cut for creative mixing. CH 1&2 have ‘corrective’ EQ for mic & line control. EQ on switches are provided.

VCA Cross Fader
Conductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Channels 3-6 can be assigned to X left side or Y right side, with green / yellow led indication. The fader is a VCA design, so wear and tear does not affect audio. Drop-in replacements. Pan trim control for imbalance.

Voltage Controlled Filters
2 filters [1 for each side of the x-fader] with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ‘mild to wild’. Sweep controls from 100Hz to 20kHz with blue led on switch.

Engineer / DJ’s Toolbox
High powered headphone output with level. ‘Music only’ Booth output on [TRS] jacks with level. 12 segment 3 colour bar metering displays mix or cue/monitor section. Channel cue overrides the monitor selected in the phones [option for post-EQ on CH 3-6]. Split Cue sends cue signals to left and selected program to right. Mute kills booth monitor output. Booth Mono sum button for phase and compatibility check.